Pressure Sensor
Hydraulic Pressure sensor/transducer DS-1-A-400- 1/4″ or 3/4″ fluid-Check ®Monitoring flow rate pressure sensor fluid-Check and wear of pumps with hydraulic measuring point Serv-Clip Type 1 or Type 2.
In addition to its robust and compact design, this sensor stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed to the liquid are made of stainless steel (Type 1.4571).
Installation Information
- Serv-Clip Type 1: Installation of pressure sensor only
- Serv-Clip Type 2: Installation of Sensors like flow rate, leakage, temperature, aqua, pressure
- Serv-Clip Type 1 and 2: manometers, filters, particle counters
Technical Information
Pressure range | 0 . . . 400 bar |
Output signal | 4 . . . 20 mA / 2 wires |
Power supply | 12 . . . 32V DC |
Operating temperature | -40 . . . 125°C |
Ambient temperature | -40 . . . 105°C |
Protection mode | IP 65 DIN EN 60 529 |
Accuracy | 1.0% |
Linearity | +/-0.5% |
Right-angle plug connection | DIN EN 175301 |
Robust stainless steel housing | |
Fully encased sensor element made of stainless steel |
*Special instructions for stainless steel pipes up to 4 mm wall thickness with SC-2 possible.